Small loaders are one of the commonly used engineering vehicles, and their operation safety is very important. The staff should undergo professional training and manufacturer guidance, and at the same time master certain operating skills and daily maintenance knowledge. Because there are many models of small loaders, you should also refer to the manufacturer’s “Product Operation and Maintenance Manual” before operating the machine. Do not let novices drive the small loader directly to avoid safety accidents. In order to reduce the occurrence of accidents, the vehicles and wheels should be checked regularly to minimize the failure problems during use. It is very important to do regular maintenance and maintenance, which can not only reduce the failure rate, but also improve the service life.
When operating a small loader, you need to pay attention to the following aspects:
1. Before operation, you should go around the small loader for a week to check the tires and machine surface problems;
2. The driver should take relevant protective measures in accordance with the regulations, and it is strictly forbidden to wear slippers and work after drinking;
3. The cab or operating room should be kept clean, and it is strictly forbidden to store flammable and explosive items.
4. Before work, check whether the lubricating oil, fuel oil and water are sufficient, whether various instruments are normal, whether the transmission system and working devices are in good condition, whether there is any leakage in the hydraulic system and various pipelines, and can only be started after confirming that they are normal.
5. Before starting, you should observe whether there are obstacles and pedestrians in front of and behind the machine, put the bucket about half a meter off the ground, and start by honking the horn. At the beginning, pay attention to driving at a slow speed, and observe the surrounding intersections and signs at the same time;
6. When working, low gear should be selected. When walking, try to avoid lifting the bucket too high. Different shoveling methods should be adopted according to different soil properties, and the bucket should be inserted from the front as much as possible to prevent unilateral force on the bucket. When working on loose and uneven ground, the lifting lever can be placed in the floating position to make the bucket work on the ground.
Post time: Dec-15-2022